Abu guda ɗaya mai ƙarfi mai ƙarfi mai ƙarfi anti-lalata shafi wanda ya ƙunshi wakili na fusion, foda zinc, kayan anti-skid, ƙarancin zamewa ≥0.55
Siffofin
● Metallic shafi tare da fiye da 90% zinc foda a cikin bushe fim, samar da duka aiki cathodic da m kariya na ferrous karafa.
● Tsaftar Zinc: 99%
● Ana amfani da shi ta hanyar Layer guda ko hadadden sutura.
● Ƙaƙƙarfan ƙaƙƙarfan zamewa ≥0.55
An shawarar amfani
Ana amfani da shi sosai a cikin layin dogo, babbar hanya da gada, wutar lantarki, injinan tashar jiragen ruwa da sauransu.Yana iya maye gurbin thermal spraying tutiya da inorganic zinc-arzikin antiskid shafi.
Umarnin aikace-aikace
Hanyoyin aikace-aikace:
Fesa mara iska / iska / buroshi / abin nadi
Ana ba da shawarar goge goge da abin nadi don gashin ɗigon, ƙaramin yanki ko taɓawa.
Substrate da surface jiyya
Karfe:fashewar da aka tsabtace zuwa Sa2.5 (ISO8501-1) ko mafi ƙarancin SSPC SP-6, bayanin martabar iska mai ƙarfi Rz40μm ~ 75μm (ISO8503-1) ko kayan aikin wuta da aka tsabtace zuwa ƙaramin ISO-St3.0/SSPC SP3
Taɓa saman galvanized
A cire maiko sosai a saman da ma'aikacin tsaftacewa, tsaftace gishiri da sauran datti ta hanyar ruwa mai tsananin ƙarfi, yi amfani da kayan aikin wuta don goge wurin tsatsa ko sikelin niƙa, sannan a shafa da ZINDN.
Aikace-aikace & yanayin warkewa
1.Pot Life: Unlimited
2.Application zafin jiki: -5 ℃- 50 ℃
3. Dangantakar zafi: ≤95%
4.Substrate zafin jiki a lokacin aikace-aikace da kuma curing ya zama akalla 3 ℃ sama da raɓa batu
5.An haramta aikace-aikacen waje a cikin yanayi mai tsanani kamar ruwan sama, hazo, dusar ƙanƙara, iska mai ƙarfi da ƙura mai nauyi
6.Cikin zafin jiki yana da yawa a lokacin rani, a kula da bushewar feshi, kuma a kiyaye iska yayin aikace-aikacen da lokacin bushewa a cikin kunkuntar wurare.
sigogin aikace-aikacen
| Hanyar aikace-aikace | Naúrar | Fesa mara iska | Fesa iska | Brush/Roller |
| Nozzle Orifice | mm | 0.43 zuwa 0.53 | 1.5 zuwa 2.5 | -- |
| Matsin lamba: | kg/cm2 | 150 ~ 200 | 3 zuwa 4 | -- |
| Siriri | % | 0～5 | 5 zuwa 10 | 0～5 |
Lokacin bushewa / bushewa
| Substrate zafin jiki | 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ | |
| Surface-bushe | 2hrs. | 1 hr. | Minti 30 | Minti 10 | |
| Ta-bushe | 5 h. | 4 h. | 2hrs. | 1 hr. | |
| Lokacin farfadowa | 2hrs. | 1 hr. | Minti 30 | 10 min | |
| Sakamakon sutura | 36 h. | 24 h. | 18 h. | 12h. | |
| Lokacin farfadowa | Ya kamata saman ya zama mai tsabta, bushe kuma ba shi da gishirin tutiya da gurɓatacce kafin ya sake dawowa. | ||||
Tufafin Gaba & Sakamako
Tufafin da ya gabata:Fesa kai tsaye a saman saman karfe ko galvanized mai zafi-tsoma ko zafi-fasa karfe tare da saman jiyya na Sa2.5 ko St3.
Tufafin da ya biyo baya:ZD Sealer (matsakaici gashi), ZD karfe sealer (azurfa topcoat), ZD Zinc- Aluminum topcoat, ZD Aliphatic Polyurethane, ZD Fluorocarbon, ZD Acrylic polysiloxane ... da dai sauransu.
Marufi & ajiya
shiryawa:25kg
Wurin walƙiya:> 47 ℃
Ajiya:Dole ne a adana shi daidai da dokokin ƙananan hukumomi.Dole ne wurin ajiya ya zama bushe, sanyi, samun iska mai kyau kuma nesa da zafi da tushen wuta.
Dole ne a kiyaye kwandon marufi sosai a rufe.
Rayuwar rayuwa:Unlimited