Abubuwa biyu polyamide adduct warkewa, babban daskararru, babban ginin epoxy fenti tare da kyakkyawan juriya ga ruwa, mai, sunadarai, da tasiri da kaddarorin juriya.
Siffofin
1.Excellent ruwa juriya da tsatsa juriya.
2.Good sinadaran juriya da man juriya.
3.Good mannewa, tasiri juriya, sa juriya
An shawarar amfani
Don kariyar karfe da kankare a cikin yanayi mara kyau, ana iya amfani da su azaman tsaka-tsaki ko a matsayin babban riga don tsarin ciki.
Umarnin aikace-aikace
Substrate da surface jiyya
Skarfe:fashewar da aka tsabtace zuwa Sa2.5 (ISO8501-1) ko mafi ƙarancin SSPC SP-6, bayanin martabar iska mai ƙarfi Rz50μm ~ 100μm (ISO8503-1) ko kayan aikin wutar lantarki da aka tsabtace zuwa ƙaramin ISO-St3.0/SSPC SP3
Duk wuraren da za a shafa za su kasance masu tsabta, bushe kuma ba su da datti, kuma za a tantance su kuma a yi musu magani daidai da ISO8504.
Tushen bita mai rufi:Welds, gyaran wuta da lalacewa yakamata a tsabtace su zuwa Sa2.5 (ISO8501-1), ko tsabtace kayan aikin wuta zuwa St3.0.
Tuh up:Cire man mai a saman sosai kuma a tsaftace gishiri da sauran datti.
Cshimfidar wuri:Don amfani da mai dacewa don rufe ramukan saman kafin aikace-aikace.
Oda surface:don Allah a tuntubi ZINDN.
Aiwatar da Magani
● Yanayin yanayi na yanayi ya kamata ya kasance daga debe 5 ℃ zuwa 38 ℃, dangi zafi iska kada ya zama fiye da 85%.
● Yanayin zafin jiki a lokacin aikace-aikace da curing ya kamata ya zama 3 ℃ sama da raɓa.
● An haramta aikace-aikacen waje a cikin yanayi mai tsanani kamar ruwan sama, hazo, dusar ƙanƙara, iska mai ƙarfi da ƙura mai nauyi.
Rayuwar tukunya
| 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 4hrs | 3hrs | 2hrs | 1.5h |
Hanyoyin aikace-aikace
Feshi mara iska, ba a ba da shawarar feshin iska ba.
Ana ba da shawarar goge goge da abin nadi don gashin tsiri, ƙaramin yanki ko gyarawa.
sigogin aikace-aikacen
| Hanyar aikace-aikace | Naúrar | Fesa mara iska | Brush/Roller |
| Nozzle Orifice | mm | 0.43 zuwa 0.53 | -- |
| Matsin bututun ƙarfe | kg/cm2 | 150 ~ 200 | -- |
| Siriri | % | 0 ~ 10 | 5 zuwa 10 |
Bushewa & Magance
| Substrate surface zafin jiki | 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| Surface-bushe | 16hrs. | 8h ku. | 4hrs. | 2hrs. |
| Ta-bushe | 48h ku. | 24h. | 12hrs. | 6hrs. |
| An warke sosai | Kwanaki 14 | Kwanaki 10 | 6 kwanaki | kwanaki 4 |
| Lokacin sake dawowa (min.) | 48h ku | 24h. | 12hrs. | 6hrs. |
| Lokacin sake dawowa (Max.) (no.2 Layer) | Kwanaki 14 | Kwanaki 10 | 6 kwanaki | kwanaki 4 |
| Lokacin sake dawowa (Max.) (Topcoat) | Kwanaki 30 | Kwanaki 20 | Kwanaki 14 | kwanaki 7 |
Gabatarwa & Sakamakon shafa
Tufafin da ya gabata:Epoxy zinc phosphate, Epoxy zinc arziki, Epoxy primer, shi ma za a iya amfani da kai tsaye a kan karfe saman fashewar tsabtace zuwa Sa2.5 (ISO8501-1).
Tufafin da ya biyo baya:Epoxy topcoat, Polyurethane, Fluorocarbon, Polysiloxane ... da dai sauransu
Shiryawa & Ajiya
shiryawa:tushe 24kg, curing wakili 4kg
Wurin walƙiya:> 25 ℃
Ajiya:Dole ne a adana shi daidai da dokokin ƙananan hukumomi.Yanayin ajiya ya kamata ya bushe, sanyi, samun iska mai kyau kuma nesa da zafi da tushen wuta.Dole ne a kiyaye kwandon marufi sosai a rufe.
Rayuwar rayuwa:Shekara 1 a ƙarƙashin kyakkyawan yanayin ajiya daga lokacin samarwa.