Tufafin fakiti guda ɗaya tare da kyakkyawan aikin rigakafin tsatsa da riƙe launi
Bayani
An acrylic topcoat ne mai saurin bushewa shafi, wanda ya ƙunshi thermoplastic acrylic guduro a matsayin tushe abu da weathering pigments da Additives, da dai sauransu.
Kayan acrylic topcoat ne mai kashi ɗaya.
Samfurin yana da mannewa mai ƙarfi, bushewa mai sauri, da taurin ƙasa mai kyau;
Sauƙaƙan kulawa da sutura, babu buƙatar cire m tsohon fim ɗin fenti lokacin gyarawa da zanen tsohon fim ɗin fenti na acrylic;
Samfurin yana da sauƙi don ginawa kuma ana iya amfani dashi a cikin ƙananan yanayin zafi.
Ma'aunin Jiki
| Jihar a cikin akwati | Babu lumps mai wuya bayan motsawa da haɗuwa, a cikin yanayin kama |
| Lafiya | 20 ku 40nm ku |
| Lokacin bushewa | Fuskar bushewa 0.5H Tsayayyen bushewa 2H |
| Lokacin fitarwa (ISO-6)/S | Rukunin fenti na masana'antu: Acrylic hasumiya fenti 105± 15S Acrylic azurfa foda Paint 80± 20S S041138 acrylic azurfa fari 50± 10S Polyester lacquer Group: Acrylic varnish, launi mai launi 80± 20S Acrylic primer 95± 5KU (Stormer danko) |
| Gloss(60)./ naúrar | Gloss 90± 10 Semi-matte 50± 10 Matsa 30± 10 |
| Gwajin giciye | 1 |
| Rufe iko, g/m2W(Varnish Ban da samfuran da ke ɗauke da launuka masu haske) | Fari 110 Baki 50 Ja, rawaya 160 Blue, kore 160 Grey 110 |
| Lambar launi, A'a. | Gashi mai tsabta W2 (lu'u lu'u-lu'u) |
| Fitin fim din bayyanar | Na al'ada |
| Abubuwan da ba su da ƙarfi/%N | 35 (hannun gashi) 40 (launi mai launi) |
Yankunan aikace-aikace
Ana iya amfani da shi don tsarin karfe, gadoji, gadi, shuke-shuken wutar lantarki, ƙwanƙolin jirgin ruwa, kayan aikin jirgin ruwa da samfuran injiniya, da dai sauransu waɗanda ke buƙatar bushewa da sauri na saman da kayan ado na ado.
Ana iya amfani da shi da epoxy primer da phosphate primer kuma ana iya amfani dashi azaman kayan ado na saman saman karfe, ko azaman gyaran fenti.
Abubuwan da suka dace
Firamare:Epoxy primer, epoxy zinc-rich primer, acrylic primer, polyurethane primer
Matsakaicin fenti:epoxy girgije baƙin ƙarfe matsakaici fenti
Zaɓi filaye daban-daban bisa ga wuraren aikace-aikacen daban-daban.
Maganin Sama
Dole ne a share fage na ƙarfe mai rufi da kyau daga mai, iskar shaka, tsatsa, tsohon shafi, da sauransu, wanda za'a iya ɗauka ta hanyar fashewar fashewar harbi ko yashi.
Dole ne a tsabtace farfajiyar da kyau da man fetur, oxide, tsatsa, tsohon shafi, da dai sauransu, kuma za'a iya harbe shi ko sandblasted don cimma daidaitattun matakan sa2.5 na Sweden na cire tsatsa, tare da rashin ƙarfi na 30-70μm.
Hakanan za'a iya cire tsatsa da hannu don cimma daidaitaccen kauwar tsatsa na Sweden ST3, tare da ƙarancin 30-70μm.
Sauran kayan aiki: ciki har da kankare, ABS, filastik mai wuya, aluminum, galvanized karfe, fiberglass, da dai sauransu, suna buƙatar tsaftataccen wuri mai tsabta tare da madaidaicin madaidaicin ko pretreatment daidai.
Sharuɗɗan aikace-aikace
Yanayin yanayi: 0℃～35℃;dangi zafi: 85% ko žasa;substrate zafin jiki: 3 ℃ sama da raɓa batu.
Marufi da ajiya:
Wurin ajiya ya kamata ya bushe, sanyi, samun iska mai kyau, guje wa yanayin zafi mai zafi, kuma nesa da wuta.Ya kamata a kiyaye kwandon kayan da aka rufe da iska.
Rayuwar shiryayye shine watanni 12.
Tsanaki
Idan ba za ku iya gama amfani da ganga lokaci ɗaya bayan buɗe murfin ba, ya kamata ku rufe murfin a cikin lokaci don hana sauran ƙarfi daga ƙafewar amfani da shi.
Lafiya da Tsaro
Kula da lakabin gargaɗin akan kwandon marufi.Yi amfani da shi a cikin yanayi mai kyau.Kar a shaka hazo kuma ka guji fallasa fata.
A wanke nan da nan da sabulu mai dacewa, da ruwa idan fenti ya fantsama a fata.Kurkura da ruwa da kyau idan an fantsama a idanu kuma a nemi kulawar gaggawa.