Bangaren biyu, babban daskararru, zinc phosphate epoxy primer da gashin gini
Gabatarwa
Bangaren biyu, babban ƙarfi, zinc phosphate epoxy primer wanda ya ƙunshi resin epoxy, zinc phosphate anti-tsatsa pigment, sauran ƙarfi, wakili na taimako da wakili na maganin polyamide.
Siffofin
• Epoxy primer ko gina gashi a tsarin sutura masu kariya
• Kyakkyawan juriya na lalata a cikin bayyanar yanayi
• Yana warkarwa a yanayin zafi ƙasa zuwa -5°C (23°F)
• Max.kan tazarar shafi ba ta da iyaka
• Gyaran gaggawa a cikin ƙirƙira ƙarfe
• Faɗin aikace-aikace
An shawarar amfani
Multi-manufa epoxy primer ko matsakaici fenti ga karfe tsarin da galvanized karfe a daban-daban yanayi yanayi.
Dace da sabon karfe ko gyara dalilai.
Umarnin aikace-aikace
Abubuwan da ake amfani da su na Jiyya na Substrate da Surface:
Karfe: fashewar fashewa zuwa Sa2.5 (ISO8501-1), bayanin martaba Rz35μm ~ 75μm (ISO8503-1)
Aiwatar da Magani:
Yanayin yanayi na yanayi ya kamata ya kasance daga debe 5 ℃ zuwa 38 ℃, da dangi zafi iska kada ya zama fiye da 85%.
Substrate zafin jiki a lokacin aikace-aikace da curing ya zama 3 ℃ sama da raɓa batu.
Rayuwar tukunya
| 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 5 h. | 4 h. | 2hrs. | 1.5h |
Hanyoyin aikace-aikace
Fesa mara iska / feshin iska
Ana ba da shawarar goge goge da abin nadi don gashin ɗigon, ƙaramin yanki ko taɓawa.
Sigar aikace-aikace
| Hanyar aikace-aikace | Naúrar | Fesa mara iska | Fesa iska | Brush/Roller |
| Nozzle Orifice | mm | 0.43～0.53 | 1.8～2.2 | -- |
| Matsin bututun ƙarfe | kg/cm2 | 150～200 | 3～4 | -- |
| Siriri | % | 0～10 | 10～20 | 5～10 |
Bushewa & Magance
| Substrate zafin jiki | 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| Surface-bushe | 4hrs | 2hrs | 1 hr | 30 min |
| Ta-bushe | 24h | 16hrs | 12hrs | 8h ku |
| Tazarar Rufi | 20hrs | 16hrs | 12hrs | 8h ku |
| Yanayin rufewa | Kafin a yi amfani da rigar da aka yi amfani da ita, saman ya kamata ya kasance mai tsabta, bushe kuma ba tare da gishiri da zinc ba. | |||
Gabatarwa & Sakamakon shafa
Tufafin da ya gabata:Ferrous karfe, zafi-tsoma, thermal fesa tare da saman jiyya na ISO-Sa2½ ko St3.Amintaccen kantin farar fata, mai wadatar zinc, firam ɗin epoxy….
Tufafin da ya biyo baya:Epoxy, polyurethane, fluorocarbon ... da dai sauransu.
Bai dace da fenti na alkyd ba.
Shiryawa & Ajiya
Girman fakiti:tushe 25kg, curing wakili 2.5kg
Hasken walƙiya:> 25 ℃
Ajiya:Dole ne a adana shi daidai da dokokin ƙananan hukumomi.Yanayin ajiya ya kamata ya bushe, sanyi, samun iska mai kyau kuma nesa da zafi da tushen wuta.Dole ne a kiyaye pail ɗin sosai.